45 Degree X060 Carbide Engraving Tool

  • 45 Degree X060 Carbide Engraving Tool

6mm shank carbide toolholder with 45 degree engraving carbide inserts.

  • •Each indexable insert has 2 cutting edges.
  • •Fine engraving 0.2mm bottom width with narrow angle 45°.  Two type of forms for your option - radius angled and radius.
  • •Full peripherally ground insert to ensure efficient repeatability.
  • •The latest coated carbide grades help you to obtain higher speed and feed rate, dramatically reducing your cycle time.
  • •One holder supports the entire X060 series of engraving inserts.
  • •Also using for deburring tool.
Holder
45_degree_X060_carbide_engraving_cutter
Drag left or right for more information.
Part No Insert Size Ød L Shank
99619-X060-06 X060 series 6 40 Steel
99619-X060-06L X060 series 6 60 Carbide
99619-X060-06LS X060 series 6 60 Steel
Insert
45_degree_X060__engraving_carbide_insert

• NC2032:
For all kinds of steel from < 40 HRC, carbon steel, alloy steel,and cast iron.
• NC2035:
ALDURA coating, reduces heat and tool wear.
For steel with heat treatment up to 56 HRC.
• XP9001:
Mirror polished, for non-ferrous metal, aluminum, brass, copper, plastic, acrylic.
Drag left or right for more information.
Part No Grade Coating Tmax. Wmin. Wmax Re R max. Depth Workpiece material
X060A45W020R NC2032 TiAlN 1.0 0.20 1.03 0.04 - PMK
X060A45W020R NC2035 ALDURA 1.0 0.20 1.03 0.04 - PKH
X060A45W020R XP9001 Polished 1.0 0.20 1.03 0.04 - N
X060A45R020_Radius form NC2032 TiAlN 1.0 - 1.1 0.2 0.12 PMK
X060A45R020_Radius form NC2035 ALDURA 1.0 - 1.1 0.2 0.12 PKH
X060A45R020_Radius form XP9001 Polished 1.0 - 1.1 0.2 0.12 N
Related Products
Jimmore GroupJimmore Group nine9 sloky jimmore