Super Drill

The best choice for drilling depths of 3XD, 4XD hole. The special inner and outer designed inserts make excellent chips control, balance the cutting force, nice surface finish and accurate diameter. Good for high productivity and high speed cutting.

-Indexable drill. 3XD: Ø10~30mm. 4XD: Ø16~30mm.
-Cost saving! 4 cutting edges, same insert for outer and inner insert.
-Above 1XD, coolant supply is needed.
Multifunction! Drilling stack, round work piece, concave surface…etc, possible to drill into angled surface without pre-drilling.

We offer other selection for 5XD~10D, please go to “Super Power Drill"

Inquiry

Holder

Drag left or right for more information.

Part No	Insert Size	T	ØD
99313-10	N9GX04T002	30.0	10.0
99313-10.3	N9GX04T002	30.9	10.3
99313-10.5	N9GX04T002	31.5	10.5
99313-11	N9GX04T002	33.0	11.0
99313-11.5	N9GX04T002	34.5	11.5
99313-12	N9GX04T002	36.0	12.0
99313-12.5	N9GX04T002	37.5	12.5
99313-13	N9GX05T103	39.0	13.0
99313-13.5	N9GX05T103	40.5	13.5
99313-14	N9GX05T103	42	14.0
99313-14.5	N9GX05T103	43.5	14.5
99313-15	N9GX05T103	45	15.0
99313-15.5	N9GX05T103	46.5	15.5
99313-16	N9GX060204	48.0	16.0
99313-16.5	N9GX060204	49.5	16.5
99313-17	N9GX060204	51.0	17.0
99313-17.5	N9GX060204	52.5	17.5
99313-18	N9GX060204	54.0	18.0
99313-18.5	N9GX060204	55.5	18.5
99313-19	N9GX060204	57.0	19.0
99313-19.5	N9GX060204	58.5	19.5
99313-20	N9GX070304	60.0	20.0
99313-20.5	N9GX070304	61.5	20.5
99313-21	N9GX070304	63.0	21.0
99313-21.5	N9GX070304	64.5	21.5
99313-22	N9GX070304	66.0	22.0
99313-22.5	N9GX070304	67.5	22.5
99313-23	N9GX070304	69.0	23.0
99313-23.5	N9GX070304	70.5	23.5
99313-24	N9GX070304	72.0	24.0
99313-25	N9GX090308	75.0	25.0
99313-26	N9GX090308	78.0	26.0
99313-27	N9GX090308	81.0	27.0
99313-28	N9GX090308	84.0	28.0
99313-29	N9GX090308	87.0	29.0
99313-30	N9GX090308	90.0	30.0

Insert

Fully ground dual-relief insert, improved surface finish and higher feed rate.
Primary relief angle is for increasing toughness of the insert, the secondary relief angle is to strengthen the axial feed rate.
Cost saving and easy inventory. Same insert for outer & inner insert.
Each insert has 4 cutting edges.

Drag left or right for more information.

Part No	Coating	Grade	Workpiece material
N9GX04T002	AlTiN	NC2032	PMKS
N9GX05T103	AlTiN	NC2032	PMKS
N9GX060204	AlTiN	NC2032	PMKS
N9GX070304	AlTiN	NC2032	PMKS
N9GX090308	AlTiN	NC2032	PMKS

Better surface finish.

Drag left or right for more information.

Holder

Drag left or right for more information.

Part No	Insert Size	T	ØD
99314-16	N9GX060204	64	16
99314-17	N9GX060204	68	17
99314-18	N9GX060204	72	18
99314-19	N9GX060204	76	19
99314-20	N9GX070304	80	20
99314-21	N9GX070304	84	21
99314-22	N9GX070304	88	22
99314-23	N9GX070304	92	23
99314-24	N9GX070304	96	24
99314-25	N9GX090308	100	25
99314-26	N9GX090308	104	26
99314-27	N9GX090308	108	27
99314-28	N9GX090308	112	28
99314-29	N9GX090308	116	29
99314-30	N9GX090308	120	30

Insert

Fully ground dual-relief insert, improved surface finish and higher feed rate.
Primary relief angle is for increasing toughness of the insert, the secondary relief angle is to strengthen the axial feed rate.
Cost saving and easy inventory. Same insert for outer & inner insert.
Each insert has 4 cutting edges.

Drag left or right for more information.

Part No	Coating	Grade	Workpiece material
N9GX04T002	AlTiN	NC2032	PMKS
N9GX05T103	AlTiN	NC2032	PMKS
N9GX060204	AlTiN	NC2032	PMKS
N9GX070304	AlTiN	NC2032	PMKS
N9GX090308	AlTiN	NC2032	PMKS

Better surface finish.

Drag left or right for more information.

Accessories

For 3xD, 4xD Super Drill
For hole diameter adjustment on Machining Center.
For center height adjustment of CNC Lathe
Adjustment Range : ±0.2 mm

Drag left or right for more information.

Catalog Cutting Data

Related Products

Jimmore Group