Indexable corner rounding insert comparison with solid carbide tools.
Cutting Condition:
- •Workpiece material:
- Hardened Alloy Steel (HRC 55°)
- •Feed rate:
- F=400 mm/min.
- •Depth of cut:
- 0.5 mm
- •Cutting:
- 4R corner rounding.
Before
Because of the solid carbide tools is used, the initial tool cost is expensive and tool management is difficult.
After
Using Indexable corner rounding insert, the tool cost is down to 40% and no more request of re-sharpening.
