ACE Spot Drill - 90°, 120°, 142° spotting and countersink

  • ACE Spot Drill
ACE Spot Drill 60°, 90°, 120° and 142°
ACE Spot Drill possesses precise positioning of the insert derived from dual clamping screwed design ensures the vibration free while cutting, plus symmetric 2-flute edge design reducing the lateral force, it enhances ACE Spot drill rigidity enabling to run high feed rate. Furthermore, the double point angles make the insert tip stronger to prolong service life, which results in lower production costs. Optimal internal coolant design brings better balancing to run at high speed. 



2-flutes edged
ACE Spot Drill with 2-flutes edged
• 2-flutes edged is symmetric, it reduces the lateral force.
Dual point angle.
ACE Spot Drill with dual point angle
• The double point angles ensure strength at the centre to prevent fracturing.
Internal coolant and dual clamping design
ACE Spot Drill with Internal Coolant
• ACE Spot Drill possesses precise positioning of the insert derived from dual clamping screwed design ensures the vibration free while cutting, plus optimal internal coolant design brings better balancing to run at high speed.
Inquiry
Insert
ACE spot insert
  • • 2-flutes deged is symmetric, it reduces the lateral force.
  • • The dual point angles ensure strength at the centre to prevent fracturing.
  • • Each insert has 2 cutting edges.
  • NC2057: Universal grade for alloy steel and cast iron.
  • NC5254: For stainless steel.
  • XP9000: For non-ferrous material such as aluminum, titanium, brass, copper and long cutting chip metal. High positive geometry and sharp edge produces excellent surface finish.


Drag left or right for more information.
SI Angle Part No Ød1 L1 L2
06
(0.236”)		 60° S9MT06T1-060-NC2057 1.2
(0.047")		 0.35
(0.014")		 4.5
(0.177")
06
(0.236”)		 60° S9MT06T1-060-NC5254 1.2
(0.047")		 0.35
(0.014")		 4.5
(0.177")
06
(0.236”)		 60° S9MT06T1-060-XP9000 1.2
(0.047")		 0.35
(0.014")		 4.5
(0.177")
06
(0.236”)		 90° S9MT06T1-090-NC2057 1.2
(0.047")		 0.35
(0.014")		 2.75
(0.108")
06
(0.236”)		 90° S9MT06T1-090-NC5254 1.2
(0.047")		 0.35
(0.014")		 2.75
(0.108")
06
(0.236”)		 90° S9MT06T1-090-XP9000 1.2
(0.047")		 0.35
(0.014")		 2.75
(0.108")
06
(0.236”)		 120° S9MT06T1-120-NC2057 - - 1.73
(0.068")
06
(0.236”)		 120° S9MT06T1-120-NC5254 - - 1.73
(0.068")
06
(0.236”)		 120° S9MT06T1-120-XP9000 - - 1.73
(0.068")
06
(0.236”)		 142° S9MT06T1-142-NC2057 - - 1.03
(0.041")
06
(0.236”)		 142° S9MT06T1-142-NC5254 - - 1.03
(0.041")
06
(0.236”)		 142° S9MT06T1-142-XP9000 - - 1.03
(0.041")
08
(0.315")		 60° S9MT0802-060-NC2057 1.6
(0.063")		 0.46
(0.018")		 6.0
(0.236")
08
(0.315")		 60° S9MT0802-060-NC5254 1.6
(0.063")		 0.46
(0.018")		 6.0
(0.236")
08
(0.315")		 60° S9MT0802-060-XP9000 1.6
(0.063")		 0.46
(0.018")		 6.0
(0.236")
08
(0.315")		 90° S9MT0802-090-NC2057 1.6
(0.063")		 0.46
(0.018")		 3.6
(0.142")
08
(0.315")		 90° S9MT0802-090-NC5254 1.6
(0.063")		 0.46
(0.018")		 3.6
(0.142")
08
(0.315")		 90° S9MT0802-090-XP9000 1.6
(0.063")		 0.46
(0.018")		 3.6
(0.142")
08
(0.315")		 120° S9MT0802-120-NC2057 - - 2.3
(0.090")
08
(0.315")		 120° S9MT0802-120-NC5254 - - 2.3
(0.091")
08
(0.315")		 120° S9MT0802-120-XP9000 - - 2.3
(0.090")
08
(0.315")		 142° S9MT0802-142-NC2057 - - 1.38
(0.054")
08
(0.315")		 142° S9MT0802-142-NC5254 - - 1.38
(0.054")
08
(0.315")		 142° S9MT0802-142-XP9000 - - 1.38
(0.054")
10
(0.394")		 60° S9MT1003-060-NC2057 2
(0.079")		 0.58
(0.023")		 7.5
(0.295")
10
(0.394")		 60° S9MT1003-060-NC5254 2
(0.079")		 0.58
(0.023")		 7.5
(0.295")
10
(0.394")		 60° S9MT1003-060-XP9000 2
(0.079")		 0.58
(0.023")		 7.5
(0.295")
10
(0.394")		 90° S9MT1003-090-NC2057 2
(0.079")		 0.58
(0.023")		 4.6
(0.181")
10
(0.394")		 90° S9MT1003-090-NC5254 2
(0.079")		 0.58
(0.023")		 4.6
(0.181")
10
(0.394")		 90° S9MT1003-090-XP9000 2
(0.079")		 0.58
(0.023")		 4.6
(0.181")
10
(0.394")		 120° S9MT1003-120-NC2057 - - 2.9
(0.114")
10
(0.394")		 120° S9MT1003-120-NC5254 - - 2.9
(0.114")
10
(0.394")		 120° S9MT1003-120-XP9000 - - 2.9
(0.114")
10
(0.394")		 142° S9MT1003-142-NC2057 - - 1.72
(0.068")
10
(0.394")		 142° S9MT1003-142-NC5254 - - 1.72
(0.068")
10
(0.394")		 142° S9MT1003-142-XP9000 - - 1.72
(0.068")
12
(0.472")		 60° S9MT1203-060-NC2057 2.4
(0.094")		 0.69
(0.027")		 9.0
(0.354")
12
(0.472")		 60° S9MT1203-060-NC5254 2.4
(0.094")		 0.69
(0.027")		 9.0
(0.354")
12
(0.472")		 60° S9MT1203-060-XP9000 2.4
(0.094")		 0.69
(0.027")		 9.0
(0.354")
12
(0.472")		 90° S9MT1203-090-NC2057 2.4
(0.094")		 0.69
(0.027")		 5.5
(0.217")
12
(0.472")		 90° S9MT1203-090-NC5254 2.4
(0.094")		 0.69
(0.027")		 5.5
(0.217")
12
(0.472")		 90° S9MT1203-090-XP9000 2.4
(0.094")		 0.69
(0.027")		 5.5
(0.217")
12
(0.472")		 120° S9MT1203-120-NC2057 - - 3.5
(0.138")
12
(0.472")		 120° S9MT1203-120-NC5254 - - 3.5
(0.138")
12
(0.472")		 120° S9MT1203-120-XP9000 - - 3.5
(0.138")
12
(0.472")		 142° S9MT1203-142-NC2057 - - 2.07
(0.081")
12
(0.472")		 142° S9MT1203-142-NC5254 - - 2.07
(0.081")
12
(0.472")		 142° S9MT1203-142-XP9000 - - 2.07
(0.081")
16
(0.630")		 60° S9MT1603-060-NC2057 3.2
(0.130")		 0.92
(0.036")		 12
(0.472")
16
(0.630")		 60° S9MT1603-060-NC5254 3.2
(0.130")		 0.92
(0.036")		 12
(0.472")
16
(0.630")		 60° S9MT1603-060-XP9001 3.2
(0.130")		 0.92
(0.036")		 12
(0.472")
16
(0.630")		 90° S9MT1603-090-NC2057 3.2
(0.130")		 0.92
(0.036")		 7.3
(0.287")
16
(0.630")		 90° S9MT1603-090-NC5254 3.2
(0.130")		 0.92
(0.036")		 7.3
(0.287")
16
(0.630")		 90° S9MT1603-090-XP9000 3.2
(0.130")		 0.92
(0.036")		 7.3
(0.287")
16
(0.630")		 120° S9MT1603-120-NC2057 - - 4.6
(0.181")
16
(0.630")		 120° S9MT1603-120-NC5254 - - 4.6
(0.181")
16
(0.630")		 120° S9MT1603-120-XP9000 - - 4.6
(0.181")
16
(0.630")		 142° S9MT1603-142-NC2057 - - 2.76
(0.109")
16
(0.630")		 142° S9MT1603-142-NC5254 - - 2.76
(0.109")
16
(0.630")		 142° S9MT1603-142-XP9000 - - 2.76
(0.109")
20
(0.787")		 90° S9MT2004-090-NC2057 4
(0.157")		 1.16
(0.046")		 9.2
(0.362")
20
(0.787")		 90° S9MT2004-090-NC5254 4
(0.157")		 1.16
(0.046")		 9.2
(0.362")
20
(0.787")		 90° S9MT2004-090-XP9000 4
(0.157")		 1.16
(0.046")		 9.2
(0.362")
20
(0.787")		 120° S9MT2004-120-NC2057 - - 5.8
(0.228")
20
(0.787")		 120° S9MT2004-120-NC5254 - - 5.8
(0.228")
20
(0.787")		 120° S9MT2004-120-XP9000 - - 5.8
(0.228")
20
(0.787")		 142° S9MT2004-142-NC2057 - - 3.44
(0.135")
20
(0.787")		 142° S9MT2004-142-NC5254 - - 3.44
(0.135")
20
(0.787")		 142° S9MT2004-142-XP9000 - - 3.44
(0.135")
20
(0.787")		 60° S9MT2004-060-NC2057 4
(0.157")		 1.16
(0.046")		 15
(0.591")
20
(0.787")		 60° S9MT2004-060-NC5254 4
(0.157")		 1.16
(0.046")		 15
(0.591")
20
(0.787")		 60° S9MT2004-060-XP9000 4
(0.157")		 1.16
(0.046")		 15
(0.591")
Screw Fit Cutter

  • • Made of hardened high alloy steel, 53 HRC.
  • • Internal coolant.
  • ACE Spotting Drill_screw fit cutter
Drag left or right for more information.
SI Part No Insert Size L ØD M
06
(0.236”)		 99688-SI06-M04 S9MT06T1 14.5
(0.571")		 8
(0.315”)		 M4xP0.7
08
(0.315")		 99688-SI08-M05 S9MT0802 19
(0.748")		 10
(0.394")		 M5xP0.8
10
(0.394")		 99688-SI10-M06 S9MT1003 22
(0.866")		 12
(0.472")		 M6xP1.0
12
(0.472")		 99688-SI12-M08 S9MT1203 25
(0.984")		 16
(0.630")		 M8xP1.25
16
(0.630")		 99688-SI16-M10 S9MT1603 31
(1.220")		 20
(0.787")		 M10xP1.5
20
(0.787")		 99688-SI20-M12 S9MT2004 35
(1.378")		 25
(0.984")		 M12xP1.75
Cylindrical shank

  • • Made of hardened high alloy steel, 58 HRC.
  • • Internal coolant.
ACE spot drill_holder
Drag left or right for more information.
SI Part No Insert Size Ød L1 L2 ØD
6
(0.236”)		 99688-SI06-06 S9MT06T1 6
(0.236”)		 27
(1.063")		 14
(0.551")		 8
(0.315”)
8
(0.315”)		 99688-SI08-08 S9MT0802 8
(0.315”)		 36
(1.417")		 19
(0.748")		 10.5
(0.413")
10
(0.394")		 99688-SI10-10 S9MT1003 10
(0.394")		 40
(1.575")		 22.5
(0.886")		 13
(0.512")
12
(0.472")		 99688-SI12-12 S9MT1203 12
(0.472")		 45
(1.772")		 25
(0.984")		 15.5
(0.610")
16
(0.630")		 99688-SI16-16 S9MT1603 16
(0.630")		 48
(1.890")		 32
(1.260")		 21
(0.827")
20
(0.787")		 99688-SI20-20 S9MT2004 20
(0.787")		 50
(1.969")		 35
(1.378")		 26
(1.024")
Catalog Cutting Data Application Examples
Related Products
Jimmore GroupJimmore Group nine9 sloky jimmore