30 Degree X060 Engraving Tool

  • 30 degree v bit, 30 degree engraving bit

6mm (0.236”) carbide shank with 30 degree engraving carbide inserts.

  • •Each indexable insert has 2 cutting edges.
  • •Fine engraving 0.2mm (0.008”) bottom width with narrow angle 30°
  • •Full peripherally ground insert to ensure efficient repeatability.
  • •The latest coated carbide grades help you to obtain higher speed and feed rate, dramatically reducing your cycle time.
  • •One holder supports the entire X060 series of engraving inserts.
  • •Also using for deburring tool.
Holder
30 degree X060 carbide engraving cutter
Drag left or right for more information.
Part No Insert Size Ød L Shank
99619-X060-06 X060 series 6mm (0.236”) 40mm (1.575") Steel
99619-X060-06L X060 series 6mm (0.236”) 60mm (2.362”) Carbide
99619-X060-06LS X060 series 6mm (0.236”) 60mm (2.362”) Steel
Insert
30 degree X060  engraving carbide insert

• NC2032:
For all kinds of steel from < 40 HRC, carbon steel, alloy steel,and cast iron.
• NC2035:
ALDURA coating, reduces heat and tool wear.
For steel with heat treatment up to 56 HRC.
• XP9001:
Mirror polished, for non-ferrous metal, aluminum, brass, copper, plastic, acrylic.
Drag left or right for more information.
Part No Grade Coating Tmax. Wmin. Wmax Re R max. Depth Workpiece material
X060A30W020R NC2032 TiAlN 0.6mm
(0.024")
0.2mm
(0.008”)
0.74
(0.029")
0.04
(0.002")
- PMK
X060A30W020R NC2035 ALDURA 0.6mm
(0.024")
0.2mm
(0.008”)
0.74
(0.029")
0.04
(0.002")
- PKH
X060A30W020R XP9001 Polished 0.6mm
(0.024")
0.2mm
(0.008”)
0.74mm
(0.029")
0.04mm
(0.002")
- N
X060A30R020_Radius form NC2032 TiAlN 0.6mm
(0.024")
- 0.84mm
(0.033")
0.2mm
(0.008”)
0.15mm
(0.006")
PMK
X060A30R020_Radius form NC2035 ALDURA 0.6mm
(0.024")
- 0.84mm
(0.033")
0.2mm
(0.008”)
0.15mm
(0.006")
PKH
X060A30R020_Radius form XP9001 Polished 0.6mm
(0.024")
- 0.84mm
(0.033")
0.2mm
(0.008”)
0.15mm
(0.006")
N
Related Products
Jimmore GroupJimmore Group nine9 sloky jimmore