Ergo Radius 0.5mm to 3.0mm Indexable Corner Rounding

  • Radius 0.5mm to 3.0mm Indexable Corner Rounding

Various corner radius inserts can fit on the same tool holder. Combination corner rounding and 45° chamfering application on same insert. 

  • ● Making it easier to change tools inside the tight quarters of your Swiss Machine's tooling layout.
  • ● Carbide insert can stand very long tool life.
  • ● Produces smooth and excellent surface finish on workpiece.
    ● Pre-balanced / G6.3 
The tool length and tool diameter selection is restricted by the limited space on Swiss type lathe. Ergo can solve this problem, we start with ER16.

Nine9 Ergo 60 deg spot drill_sets
Ergo Sets ~ For your first ordering ~
Contents: Corner Rounding basic holder x 1, ER16 nut x 1, pin x1, L Key x 1 and insert key x 1. (The insert is not included.)
Inquiry
Holder
● With Balance grade: G6.3 10000 r.p.m.

Ergo 60 deg spot drill ER16 collet
Drag left or right for more information.
Part No Insert Size L
99816-606 N9MT05T1 22mm
(0.866")
Set of Ergo Nut
Set of Ergo Nut
* Ergo Nut, High Strength Ergo Pin and L-Key are included.

Drag left or right for more information.
Part No Ød High Strength Ergo Pin L-Key
99816-M19S 25mm
(0.984")		 NS-50025 NK-LW3
99816-M22S 28mm
(1.102")		 NS-50028 NK-LW3
Insert
  • ● Spotting and corner rounding both of carbide inserts can fit on the same tool holder.
  • ● Each insert has 2 cutting edges.
  • >> Link here for more information of spotting insert.

Ergo spot drill carbide insert
Drag left or right for more information.
Part No Coating Corner radius (R ) Grade Workpiece material
N9MT05T1RC05 TiN 0.5mm (0.02") NC2071 PM
N9MT05T1RC05 DLC 0.5mm (0.02") NC9036 MN
N9MT05T1RC075 TiN 0.75mm (0.03") NC2071 PM
N9MT05T1RC075 DLC 0.75mm (0.03") NC9036 MN
N9MT05T1RC10 TiN 1.0mm (0.039") NC2071 PM
N9MT05T1RC10 DLC 1.0mm (0.039") NC9036 MN
Holder
● With Balance grade: G6.3 10000 r.p.m.

Ergo 60 deg spot drill ER16 collet
Drag left or right for more information.
Part No Insert Size L
99816-614 N9MT11T3 22mm
(0.866")
Set of Ergo Nut
Set of Ergo Nut
* Ergo Nut, High Strength Ergo Pin and L-Key are included.

Drag left or right for more information.
Part No Ød High Strength Ergo Pin L-Key
99816-M19S 25mm
(0.984")		 NS-50025 NK-LW3
99816-M22S 28mm
(1.102")		 NS-50028 NK-LW3
Insert
  • ● Spotting and corner rounding both of carbide inserts can fit on the same tool holder.
  • ● Each insert has 2 cutting edges.
  • >> Link here for more information of spotting insert.

Ergo corner rounding carbide insert
Drag left or right for more information.
Part No Coating Corner radius (R ) Grade Workpiece material
N9MT11T3RC10 TiN 1.0mm
(0.039")		 NC40 PM
N9MT11T3RC10 DLC 1.0mm
(0.039")		 NC9036 MN
N9MT11T3RC15 TiN 1.5mm (0.059") NC40 PM
N9MT11T3RC15 DLC 1.5mm (0.059") NC9036 MN
N9MT11T3RC20 TiN 2.0mm (0.079") NC40 PM
N9MT11T3RC20 DLC 2.0mm (0.079") NC9036 MN
N9MT11T3RC25 TiN 2.5mm (0.098") NC40 PM
N9MT11T3RC25 DLC 2.5mm (0.098") NC9036 MN
N9MT11T3RC30 TiN 3.0mm (0.118") NC40 PM
N9MT11T3RC30 DLC 3.0mm (0.118") NC9036 MN
N9MT11T3RC1/64 TiN 1/64 NC40 PM
N9MT11T3RC1/64 DLC 1/64 NC9036 MN
N9MT11T3RC1/32 TiN 1/32 NC40 PM
N9MT11T3RC1/32 DLC 1/32 NC9036 MN
N9MT11T3RC1/16 TiN 1/16 NC40 PM
N9MT11T3RC1/16 DLC 1/16 NC9036 MN
N9MT11T3RC3/32 TiN 3/32 NC40 PM
N9MT11T3RC3/32 DLC 3/32 NC9036 MN
N9MT11T3RC1/8 TiN 1/8 NC40 PM
N9MT11T3RC1/8 DLC 1/8 NC9036 MN
Catalog Application Examples
Related Products
Jimmore GroupJimmore Group nine9 sloky jimmore